WINDLINK® (H)07RN-F LSOH

Descrizione

Descrizione

Norme

  • Internazionale
    CENELEC HD22-12; EN 50525-2-21

Application

This cable is specially designed for Wind Turbines and to be used for the Loop .

Maximum torsion stress ± 150°/meter ( ± 100°/meter for 400mm²) 
 - Standard test : 2000 cycles
-  Results : No copper wire broken

The quality of material used for insulation and sheathing and high quality copper conductors make the cables both flexible, durable, resistant to torsion and to high temperatures. Nexans offers more than a decade of experience in the wind energy market. Our expertise makes WINDLINK® cables highly recommended for wind turbines.

 

 

Main characteristics

  • Frequent torsion: Excellent twisting behaviour
  • Industrial cables resistant to high temperatures
  • Heavy duty for industrial applications
  • Operating voltage up to 1 kV for use in fixed protected installations
  • Temperature on core: 90°C in normal use - 250°C in short circuit
  • Water resistance: AD2, AD6
  • Corrosive and polluting substances resistance: AF3
  • Outdoor use: temporary and permanent
  • Impact resistance: AG2
  • Oil resistant ASTM/IRM 902 and special oils used in wind turbines 
  • UV resistant
  • Ozone resistant
  • Flame retardant (IEC 60332-1)

 

Design 

1. Conductor
Flexible (fine wire class 5 acc. to IEC/EN 60228)
Annealed plain copper - Optional PET separator on core

2. Insulation
Special cross-linked synthetic halogen free rubber type EI4, improved for EI7 high temperature
Optional PET tape on insulation or assembling

3. Sheath
High mechanical performance, oil- and ozone resistant 
Special cross-linked EM8 synthetic halogen free rubber, tested for EM7 application (90°C) and improved for low temperature behaviour (-40°C)
Colour: black

Complementary technical data for WINDLINK® LV loop rubber cables

Electrical characteristics

Permissible current rating (see table):
Each cable has been tested to the following levels:

  • Permanent temperature of operation on the core 90°C
  • Ambient temperature for indoor installation 30°C

Correction factors for other ambient temperature:
According to IEC 60364-5-52 Table B.52.14

 

Ambient temperature (°C) Correction factor 
10 1.15
15 1.12
20 1.08
25 1.04
30 1
35 0.96
40 0.91
45 0.87
50 0.82
55 0.76
60 0.71

The Voltage drop has been determined with cos φ= 0.8

Short circuit: constant K= 139 for 1 second calculated acc. to IEC 60949 (short circuit temperature +250°C and conductor temperature +90°C)

Usage characteristics

Bending radius:

Mobile use = 6 x External diameter
Static use = 3 x External diameter , if the external diameter < 12mm, 4 x External diameter, if the external diameter >12 mm.

Sheat oil resistance: good in mineral oils, gear and hydraulic oils

  • Mineral oil ASTM/IRM 902, 24h at 100°C
  • Gear box oil Tribol 1710/320 or equiv, 72h at 40°C
  • Hydraulic oil Mobil DTE 13 M or equiv, 72h at 40°C 

 

Caratteristiche

Caratteristiche

Caratteristiche costruttive

Caratteristiche costruttive

Costruzione
-
Materiale del conduttore
Rame ricotto liscio
Flessibilità del conduttore
Flessibile classe 5

Caratteristiche dimensionali

Caratteristiche dimensionali

Outer diameter acc Windturbines needs Min Max
26.1 ... 31 mm
Quantitativo rame
- kg/km
Peso approssimativo del cavo
- kg/km

Caratteristiche elettriche

Caratteristiche elettriche

Tensione nominale Uo/U (Um)
450 / 750 V (600/1000)
Tensione di prova
3500 V

Caratteristiche meccaniche

Caratteristiche meccaniche

Resistenza meccanica all'impatto
Buona
Sollecitazione meccanica
15 N/mm2

Caratteristiche d'utilizzo

Caratteristiche d'utilizzo

Densita' fumo
IEC 61034
Resistenza all'olio
Yes
Resistenza U.V.
Yes
Temperatura massima di cortocircuito del conduttore
250 °C
Temperatura massima di servizio del conduttore
90 °C
Temperatura Operativa
-40 ... 55 °C
A tenuta d'acqua
AD2 to AD6

Risorse

Risorse

Vendita e consegna Informazioni

Marking

WINDLINK® NEXANS 213 USE< HAR >(H)07RN-F LSOH -40+90°C
Nb cores X (or G) S
X = without G/Y
G = with G/Y
S = cross section (mm2)
Week + year of manufacture
meter marking

 

Insulated cores identification

• 1 core = Black (preferential)
• 2 cores = Brown + Blue
• 3 cores = Green/Yellow + Blue + Brown (G)
Brown + Black + Grey (X S>4mm²)
• 4 cores = Green/Yellow + Brown + Black + Grey (G)
Blue + Brown + Black + Grey (X S 1.5 & 2.5mm²)
• 5 cores = Green/Yellow + Brown + Black + Grey + Blue (G)
• >5 cores = black + white numbers (X) + G/Y (G)

Contattaci

Argomenti su cui si desidera ottenere maggiori informazioni:

Campi obbligatori*

Si prega di controllare l'inserimento e riprovare.

Un indirizzo e-mail deve contenere una sola @

Protezione dei dati personali

Avete il diritto di opporvi al trattamento dei vostri dati personali e/o al loro utilizzo a fini di marketing diretto o commerciale

Grazie!

Grazie per averci contattato. Ci metteremo in contatto con te a breve.

Errore

Si è verificato un errore. Si prega di riprovare.

Chiudi

Contattaci

Campi obbligatori*

Si prega di controllare l'inserimento e riprovare.

Un indirizzo e-mail deve contenere una sola @

Protezione dei dati personali

Avete il diritto di opporvi al trattamento dei vostri dati personali e/o al loro utilizzo a fini di marketing diretto o commerciale

Grazie!

Grazie per averci contattato. Ci metteremo in contatto con te a breve.

Errore

Si è verificato un errore. Si prega di riprovare.

Chiudi